Computer help please!?
Question: I want to print off some of my digital pictures, and i've got the photo paper, i just don't know how to do this. help, please and thanks!
Best Answers: Computer help please!?
The easiest thing is to check in the instruction manual that came with the printer. Generally, open up whatever application supports pictures (or, double-click on the picture filename itself); then hit control-P (for most Windows applications this brings up the Print dialog box) and then send it to your color printer. The photo paper will go in probably shiny side up, loaded in just like regular paper.
NTLDR is Missing. Issue: NTLDR is Missing. Related errors: Below are the full error messages that may be seen when the computer is booting. NTLDR is Missing Press any key to restart Boot: Couldn't find NTLDR Please insert another disk NTLDR is missing Press Ctrl Alt Del to Restart Cause: 1. Computer is booting from a non-bootable source. 2. Computer hard disk drive is not properly setup in BIOS. 3. Corrupt NTLDR and/or NTDETECT.COM file. 4. Misconfiguration with the boot.ini file. 5. Attempting to upgrade from a Windows 95, 98, or ME computer that is using FAT32. 6. New hard disk drive being added. 7. Corrupt boot sector / master boot record. 8. Seriously corrupted version of Windows 2000 or Windows XP. 9. Loose or Faulty IDE/EIDE hard disk drive cable. Solutions: Computer is booting from a non-bootable source Many times this error is caused when the computer is attempting to boot from a non-bootable floppy disk or CD-ROM. First verify that no floppy diskette is in the computer, unless you are attempting to boot from a diskette. If you are attempting to boot from a floppy diskette and are receiving this error message it is likely that the diskette does not have all the necessary files and/or is corrupt. If you are attempting to install Windows XP or Windows 2000 and are receiving this error message as the computer is booting verify that your computer BIOS has the proper boot settings. For example, if you are attempting to run the install from the CD-ROM make sure the CD-ROM is the first boot device, and not the hard disk drive. Second, when the computer is booting you should receive the below prompt. Press any key to boot from the CD Important: When you see this message press any key such as the Enter key immediately, otherwise it will try booting from the hard drive and likely get the NTLDR error again. Note: If you are not receiving the above message and your BIOS boot options are set properly it's also possible that your CD-ROM drive may not be booting from the CD-ROM properly. Verify the jumpers are set properly on the CD-ROM drive. Additional information about checking the CD-ROM drive connections can be found on document CH000213. Additional information: This error has also been known to occur when a memory stick is in a card reader and the computer is attempting to boot from it. If you have any type of card reader or flash reader make sure that no memory stick is inside the computer. Computer hard disk drive is not properly setup in BIOS Verify that your computer hard disk drive is properly setup in the BIOS / CMOS setup. Improper settings can cause this error. Additional information on how to enter the BIOS / CMOS setup can be found in document CH000192. Corrupt NTLDR and/or NTDETECT.COM file Windows 2000 users Windows XP users Windows 2000 users If your computer is using Microsoft Windows 2000 and you are encountering the NTLDR error. Create the below boot.ini file on the floppy diskette drive. [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partiti... [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WI... Windows 2000 Professional" /fastdetect Copy the NTLDR and NTDETECT.COM files from another computer using the same Operating System. Both of these files are located in the root directory of the primary hard disk drive. For example, C:\NTLDR and C:\NTDETECT.COM should be the locations of these files on many computers. * Please keep in mind that these files are hidden system files, if you need additional help with viewing hidden files in Windows please see document CH000516. Once these files have been copied to a floppy diskette reboot the computer and copy the NTLDR and NTDETECT.COM files to the root directory of the primary hard disk drive. Below is an example of what commonly should be performed from the A:\> drive. copy ntldr c: copy ntdetect.com c: After the above two files have been copied, remove the floppy diskette and reboot the computer. Windows XP users 1. Insert the Windows XP bootable CD into the computer. 2. When prompted to press any key to boot from the CD, press any key. 3. Once in the Windows XP setup menu press the "R" key to repair Windows. 4. Log into your Windows installation by pressing the "1" key and pressing enter. 5. You will then be prompted for your administrator password, enter that password. 6. Copy the below two files to the root directory of the primary hard disk. In the below example we are copying these files from the CD-ROM drive letter "E". This letter may be different on your computer. copy e:\i386\ntldr c:\ copy e:\i386\ntdetect.com c:\ 7. Once both of these files have been successfully copied, remove the CD from the computer and reboot. Misconfiguration with the boot.ini file Edit the boot.ini on the root directory of the hard disk drive and verify that it is pointing to the correct location of your Windows Operating System and that the partitions are properly defined. Additional information about the boot.ini can be found on document CH000492. Attempting to upgrade from a Windows 95, 98, or ME computer that is using FAT32 If you are getting this error message while you are attempting to upgrade to Windows 2000 or Windows XP from Windows 95, Windows 98, or Windows ME running FAT32 please try the below recommendations. 1. Boot the computer with a Windows 95, Windows 98 or Windows ME bootable diskette. 2. At the A:\> prompt type: sys c:
I uninstalled intel extreme from my computer , so computer got restarted and all display settings changed .?
I keep getting this message on my computer about "google update" and it makes my computer freeze, any ideas?
This is very simple to do. The easiest way to do this is to go into your print options dialog box before hand and set up what you wish for your photos. Such as type of paper you will use, what degree of perfection, etc. To do this go into Control Panel, and select your Print and Fax folder by double clicking its icon. Once inside, what you need to do is determined by the photo manufacturer. Mine is a Dell, so I would select off the What do you want to do? list. It guides me through many different projects I do for the first time. As I answer questions for what I want, it configures the settings for me. If you need help with how to use your particular printer, open it as I explained above, and then click on the Help button, usually in the upper right hand corner. Once inside Help, you can select the topic you need assistance with on the left, and the answer will appear in the right pane. You can print out these answers and then use the printed out instructions to guide you while you setup the printer for photo printing. When you are done printing your photos, the printer defaults will return automatically, you don't need to worry about writing down all the settings before the settings are changed. All printers these days store a default printer setup in the system registry. If neccasary, reboot and all the defaults will return. Usually however, all you need to do is direct it to print normally by selecting some text to print. You don't have to do this just to reset the original settings, I am saying the settings will just be there when you go to print something else. Good luck and much fun with your photos, have a nice day.
I don't think it is your hard drive. You would see some type of error message or the computer would not boot. I also don't think it is a memory issue. If it was, you would hear a series of beeps when you first turn on the computer. Could be the power supply going bad, the CPU over heating or something as simple as a loose connector. Open the case and make sure the fan that sits atop the CPU has no dust between the heat sink and fan. You will know what I am talking about when you look at it. If there is dust on the heat sink, you will not be able to see the the heat sink's fins. Carefully clean this off. I find using tweezers and/or real sticky tape works best. While you are at the CPU, there should be a wire running from the fan to a spot next to the CPU on the motherboard. Make sure that is plugged in securely. The compound that is between the CPU and heat sink could have been burned off, and new compound needs to be applied. You have to be careful removing the heat sink and fan, as you could damage the CPU. While you have the case open, take the time to clean out the "dust bunnies" and make sure all of your fans are working. When the computer shuts off, is there a smell at the back of the computer near the power supply? If so, the power supply is going or has gone bad. Make sure the fan on the power supply is working. If it is not working, replace the power supply as soon as possible. If you have a local computer shop, take it to them to get a second opinion. If you know somone who builds their own computers, ask them to take a look at it. If you can't fix it yourself, you just might have to take it to be repaired.
Download the digital photos on a photo shop and that way you'll be able to save and print your photos.
Unlike other operating systems, you can't transfer programs that have been installed on Microsoft Windows. You'll have to re-install from the original media. You can copy data across without a problem - such as song files or image files. You can use an external drive, USB memory stick or digital camera to transfer files across. To reformat and reinstall simply boot from your original Microsoft Windows Operating System CD and follow the prompts.
If you have your own answer to the question Computer help please!?, then you can write your own version, using the form below for an extended answer.